BKVFJ - BUTYL GUTTER & LAP SEALANT

  • MSDS: BKVFJ
  • Manufacturer: MACKLANBURG DUNCAN
  • Product Name: BUTYL GUTTER & LAP SEALANT
  • National Stock Number: 8030-00F017208
Product Identification

Product ID:BUTYL GUTTER & LAP SEALANT
MSDS Date:12/10/1990
FSC:8030
NIIN:00F017208
MSDS Number: BKVFJ

Responsible Party
MACKLANBURG-DUNCAN
4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73118

Emergency Phone: (405) 528-4411

Info Phone: (405) 528-4411

Cage: 82464

Contractor
MACKLANBURG-DUNCAN
OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

Ingredients

HYDROTREATED LIGHT DISTILLATE, PETROLEUM; C12-C15

CAS: 64742-47-8

Fraction By Weight: 5%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


BUTYL RUBBER COMPOUND

CAS: 9003-28-5

Fraction By Weight: 40%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/INGESTION: IRRITATION. SKIN:
IRRITATION & DERMATITIS. INHALATION: RESPIRATORY TRACT IRRITATION,
ANESTHESIA, DIZZINESS, & HEADACHE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/INGESTION: IRRITATION. SKIN: IRRITATION &
DERMATITIS. INHALATION: RESPIRATORY TRACT IRRITATION, ANESTHESIA,
DIZZINESS, & HEADACHE.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MIN. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:106F
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CO, FOAM OR DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL FIRE FIGHTING GEAR & NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS. WATER SPRAY MAY BE INEFFECTIVE.
Unusual Fire/Explosion Hazard:FUMES MAY IGNITE EXPLOSIVELY.

Accidental Release

Spill Release Procedures:SCRAPE INTO CONTAINERS.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES, SPARKS,
OR FLAME. STORE BETWEEN 40-120F. DON'T INGEST. KEEP AWAY FORM
CHILDREN. USE ONLY IN WELL VENTILATED AREAS.
Other Precautions:AVOID SKIN CONTACT.

Exposure Controls

Respiratory Protection:WEAR NIOSH APPROVED CARTRIDGE RESPIRATOR.
Ventilation:PROVIDE ADEQUATE VENTILATION TO KEEP Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Work Hygienic Practices:WASH SKIN/HANDS AFTER USE.
Supplemental Safety and Health
PERCENT SOLIDS: 74%

Chemical Properties

Boiling Pt:B.P. Text:300F
Vapor Pres:<11
Vapor Density:>1
Spec Gravity:1.26
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE OR PIGMENTED SHINY SEMI-SOLID

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, FLAMES, & OTHER HEAT SOURCES
Hazardous Decomposition Products:CO2, CO, & UNKNOWN HYDROCARBONS

Disposal

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.